pgmfi.org

Ok. i had logger from xenocron but its dead now, so i put nokia cable and got it working with bre and latest turboedit+ecucontrol. It logs maybe 10secs and then freezes, both... I have no clue whats going on.. Any ideas?

Tryed with win7, bre works fine and when boost it changes to boost map (in datalogger) but bre freezes when datalog is on so i cannot do anything but watch it logging...

ok, to narrow it down...try turning things off.

go to settings and turn off statistics, gear calcs and calculate new fuel value. then on the main datalogging form under sensor selections, turn off most everything and try datalogging again. then bring sensors and options back on until you get the error again and post back with results. sorry for the trouble...but i have no idea if it works 100% with win7.

I think it must be something on win xp and im gonna format and reinstall.. I got it working better like 10min or something by removing service pack 3. Gotta have car tuned, hy35 with 20psi of boost allready.. afr is 10-10.5:1 at boost so have to make some tune.. And cruising tuning too..

Got new cable from ebay and it works.. $2... Dont buy DKU-5 from dealextreme.