Im having some serious issues with my car right now. First I'll name off what it is. The car is a 88 Crx si with a built d16a6 motor, gm 3 bar map sensor, 450cc inectors, walbro 255.
Since Ive had the car we never got it running perfect but it was running better than it is now.
I originally started with a problem of not getting enough fuel in boost, the car would run to about 8psi or so, then it would just start leaning out, no matter the changes that were made in turboedit. I eventually maxed out the turboedit cells but nothing happened.
I figured I may be having fuel delivery problems, changed FPR, fuel filter and everything is still the same.
Then I started asking for help on the forums, people sending me bins etc etc. We figured out that my original bin was set for 200% fuel correction and I was told by xenocron to start over, he sent me a map. i tried to run it but it didnt work, the car would barely run in vacuum and wouldnt even try boost, was to lean.
I checked the settings and it was set to 240cc inectors, and 0% fuel correction BUT BUT BUT the numbers in the cells ewre EXACTLY how they would look if it were scalled for 450cc injectors and 120% correction (I checked with current known running maps)
So where I stand now is completely lost.
I cant take my old bins (all set to 450cc and 200% fuel correction) and run them, they run fine, but only in vacuum, not a single one of them will let me boost, car just goes balls lean. I used to be able to boost 8+ and then it would start to lena out, its like it hits a wall @ 0 or something
I need help, advice and info on what I need to do. Im completely lost and not even once have I taken this god damned car to redline yet. I can email anyone any of my maps they need to see or take screen shots of anything. I just need to get this car moving the way it should be.
Im running turboedit version 2.6.1 if that matters
My email is
905ef8@gmail.com
Thanks guys