pgmfi.org

UPDATE!!!

DKU-5 USB cable with 4 wires (red, yellow, green, blue) works great. If anyone is having trouble here it goes: red is not used

YELLOW to pin-----1,
BLUE to pin--------2,
GREEN to pin------4,

Which settings do you guys use on EcuControl for Port and Speed coneections?
All i see are COM1, COM2, etc... settings.
Should i see a USB option?
Cheers!

you need to check the settings on your computer. It will show up in the com ports section. Just see what it assigned. Probably 2. Then just tell ecu control to use that one.

I have ONLY had it work for me on tghe default speed setting. I forget what it is off hand right now.

Just for fun I am attaching a document that I drew up. It explains in very fine detail how to install the drivers and setup ecucontrol to run. This goes right from the start to finish of the entire install. I will ask that you use this for your help only. I know if somebody wanted to it would not be hard to include this with packages of people selling prechipped ecu's wioth datalogging and such. But I ask that you please make your own document for such uses. Or pay me to use mine. I wont charge a lot. Maybe $500 per ecu sold or something like that.

Either way, it should help you with your setup.

I have a P28 and a USB with; The sheild, Black, Green, White, Red. What do i do?

hook it up silly!

Silly?

I know this about the USB I have:

Red--> +5v
White-->Data -
Green-->Data +
Black-->Ground
Shield-->...idk...

So what wire goes where on the CN2 on the P28 ???

I don't know if this will help, but I made a little write up on the DKU-5 I got from everydaysource:

viewtopic.php?t=7451

i dont have a user name or password to that forum

then make one, it takes like 2 seconds and its free.

--Darren

OK this is what i know now...

Data- (white) --> Pin 4
Data+ (Green) --> Pin 2
Ground (Black) --> Pin 1

so i wont use the red +5v cut that off but what do i do with the shield???


USB Wire Color Code:

RED, ORANGE--> POWER, +5V
WHITE, YELLOW--> DATA -
GREEN, GREY--> DATA+
BLACK, BLUE, BROWN--> GROUND

OK i see in that fourm the Rx and Tx...

Rx is Data+ or Data- ????
Tx is Data+ or Data- ????

OK FOUND OUT THAT YOU HAVE TO USE A CELL PHONE CABLE! YOU CAN NOT USE A CABLE THAT CONNECTS A MOUSE PRINTER OR KEYBOARD, TO A COMPUTER!! NOKIA IS THE ONE THAT THERE ARE DRIVERS OUT THERE FOR.

Yeah, you need a USB or Serial to TTL converter. The Nokia DKU-5 has a USB to TTL converter built in. TTL is the language the ECU uses.

ok, here is my problem,, my dku-5 cable came in today and 5 wires are: white, orange, blue yellow, and green, i have read all of these posts and have not figure out how, all of them have a different wire color than what i have........