kablammyman wrote:
1) When starting the plugin, I aways get a "No MTS Ports available" message. I have no idea what this means...or if its even a bug, but I'd thought I would let you know. This doesnt seem to have any negative effects however.
2) In the map trace functions, I noticed that the cells for -3 inHg are always blank, but .5 psi and -4inHg are filled in
3) I cant autotune. I have the wideband enabled (plx m-series) and I loaded the target afr csv files, but the buttons to calculate AND adjust TE map the new fuel values tab are always grayed out.
4) Does the Average tab give me the fag afr the cell in the fuel table produce? Is it safe to use these vales to as the current afr comming from said cell?
5) What is the "point count" tab for?
6) This is a minor issue...may not be even worth looking at, but, when filling out the information for your cars gearing, everytime you clear the cell, you get a "please input a number" message. It gets annoying, but it doesnt interfere with the input
1) The "No MTS Ports available" message is from the combobox under the innovate tab looking for available ports to add to the list. On my laptop if i dont have the usb plugged in and i start the plugin i get that message...if you have the usb plugged in that "COM #" is added to the list. If you arent using the innovate tab...you dont have to worry about it, otherwise plug in all cables before opening the plugin.
2) That is an issue with the rom...see the work that 1net did to fix that with ng61
http://forum.pgmfi.org/viewtopic.php?t=152143) I will look into and fix that, they are supposed to enable when you start logging with any of the wideband selections. I will also be adding a "true" autotune timer and settings for min and max change...so the buttons may dissappear soon.
*edit i just looked....you have to have the target afr table loaded through the autoload (File>Set Target AFR Autoload...). just loading the target afr table wont enable the button...thats an error on my part. so for now set the autoload and restart the plugin.
4) Yes/No. I set up single cell and 4-cell logging each with the ability to average the entire sessions values or just the previous X amount of sampled values (user entered number).
For example if you average the entire session, and you get values of 12.0, 12.5, 12.1, 13.0 and 12.7...the value recorded is 12.46. If you average the session based on 3 values, and you get the same afrs...the value recorded is 12.60. (the avg of the last 3 values)
If you have the number set too high, you may not even get any values recorded...
5) Just to see how many "hits" you have at each cell...its calculated for averageing so i added it to a grid. Its not really needed and i may take it out. If you average based on a certain number, then you can see which cells you hit but didn't get a value for.
6) I will fix that...it might be better to check for all numeric values when apply/close is pressed instead of when entering info.
hopefully that makes sense, if anyone need clarification let me know. I also started working on an instruction/how to use document to include. If i start getting bored i will hopefully finish it.