pgmfi.org

Hacking up Honda's ECU
It is currently Thu Mar 28, 2024 4:19 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Wed Jun 11, 2014 8:54 am 
Offline

Joined: Sat Apr 19, 2014 5:51 pm
Posts: 4
Turboedit has been datalogging fine for 3 weeks then today in the map section it decides it doesn't want to map columns. So its recording afr and rpm but not afr and vacuum.
Very frustrating as it was working perfectly.
I've tried un-installing ecuControl but to no avail.

Should I completely un-Install turboedit and start again ?


Top
 Profile  
Reply with quote  
PostPosted: Thu Jun 12, 2014 11:37 am 
Offline

Joined: Sat Apr 09, 2005 9:53 am
Posts: 625
can you post a screen shot or the csv file that shows what you are describing?


Top
 Profile  
Reply with quote  
PostPosted: Wed Aug 13, 2014 7:33 pm 
Offline

Joined: Sat Apr 19, 2014 5:51 pm
Posts: 4
Sorry for the delay,I bought a house and have been busy moving.

I've tried re-installing everything but to no avail, so I bought a new laptop which I have just finished installing everything on which I will try at the weekend.
How do I get a csv file?


Top
 Profile  
Reply with quote  
PostPosted: Sat Aug 16, 2014 2:58 pm 
Offline

Joined: Sat Apr 19, 2014 5:51 pm
Posts: 4
Had another go with a brand new laptop. Same problem. Column and row data is not being picked up by Ecucontrol.
Interestingly If I use the latest NG63 rom I get row data and then I'm just missing column.


Ultimately I believe It may be the Moates Hulog or the cable that connects to the ecu unless any one has come across this issue before?
Strange how the NG63 rom works better than the older roms, otherwise I would think its a wiring issue 100%.
I've uploaded a screenshot anyway.


Attachments:
screenshotTurboedit.jpg
screenshotTurboedit.jpg [ 307.42 KiB | Viewed 15054 times ]
Top
 Profile  
Reply with quote  
PostPosted: Tue Aug 19, 2014 8:52 am 
Offline

Joined: Sat Apr 09, 2005 9:53 am
Posts: 625
try 6.1.18:
http://honda-perf.net/turboedit/EcuControl%206.1.18%20Full%20Install.exe
I'll look thru the settings when I get some time, been awhile since I've had to diagnose things...

or try 1.0.7b:
https://sites.google.com/site/tunerexpress/


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group