pgmfi.org
http://forum.pgmfi.org/

My STEP-BY-STEP dataloggin to get you connected to your ECU!
http://forum.pgmfi.org/viewtopic.php?f=54&t=6116		 Page 2 of 2
Author:  irocz [ Thu Aug 04, 2005 3:53 am ]
Post subject: 
I leared how to datalog from this write up, Thanks. Now i am trying to use the auto adjust feature with no sucsess, and i have not found any info on the subject.
Author:  EG94R [ Tue Aug 09, 2005 9:27 pm ]
Post subject:  Re: can't connect
Rdeceptions wrote:
I am using a Moates Hulog and burner, P28 ecu all set up. Trying to get datalogging working, i will be getting the innovate wide band in a few weeks. i went through the whole process above step by step and all i get is Bad Response. Checksum is removed, datalog added. according to device manager the hulog is working fine, but i cant connect, any ideas? the map is a base P30, running a LS/VTEC with Type-R internals.



i have the same datalogging kit and ecu and the same problems can someone help.this is driving me crazy
Author:  Black R [ Mon Mar 06, 2006 1:13 pm ]
Post subject: 
did this ever make it into the wiki?

it may be beneficial for the new users if you explain whether you're using crome pro or freelog, etc, for datalogging.....
Author:  ares650 [ Wed Jul 19, 2006 10:47 pm ]
Post subject: 
this should be a sticky!!! :lol:
Author:  TwoKSiR [ Sun Jun 15, 2008 11:36 pm ]
Post subject:  Re: My STEP-BY-STEP dataloggin to get you connected to your ECU!
is this for Crome Pro?
Author:  b20vtec2 [ Fri Oct 30, 2009 2:14 am ]
Post subject:  Re: My STEP-BY-STEP dataloggin to get you connected to your ECU!
i have j12 in my ecu what does it do and why should i remove it? also should i desolder it or just cut it?
Page 2 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/