Hey guys for a start I'm a mechanical engineering student and I've taken an interest in coding and what not with the hopes of pulling data for example RPM from the bike and using it to control a servo. I'm hoping that by using a raspberry pi 3 I can get this data from the bike and use it to control a servo which will lower and raise the velocity stack so that variable pulse tuning can be achieved. I've started reading this thread
viewtopic.php?f=57&t=22199&hilit=raspberry+pi but unfortunately its kinda falling on deaf ears at the moment and I just wondered if there was anything or anyone that could bring me up to speed in what I need to start pulling data from the bike.
Kind regards
Haydn