pgmfi.org

Hi, i just chipped my P06. I used rom from http://wikitest.pgmfi.org/twiki/bin/vie ... itionCodes

Check engine turns on, rev at 3k rpm. What's going bad?

The modification of the ECU has not been done properly (hardware and/or software) and it no longer works with the main MPU but with the emergency CPU.

If J1 jumper is opened eveything is OK. If closed errors appear. I will try program other roms and write about it whats im doing bad.

Also check for tiny tiny solder strings or incomplete solder joints where you added the socket and latch chip. I have seen many chipping attempts fail because someone wasnt careful.

I disabled some sensors and works fine, thanks.