Joined: Wed Apr 14, 2010 11:38 am Posts: 2
|
I had my B20 vtec running on Bre and an ostrich 2 suddenly it stoped running and even though I reloaded the rom it made no differance. I tried to verify the ostrich as shown on the moates site and it failed. I then tried an old chip I had used previously and it ran fine so ecu is OK. I then burnt a chip with the same rom I was using and also with a standard Euro PWO bin, neither of these worked and also won't verify. I thought maybe it was a bad chip so I bought a new one but that is the same. Could connecting the faulty ostrich somehow have corrupted my Bre software or the Flash and Burn software.
|
|