pgmfi.org

Hacking up Honda's ECU
It is currently Fri Mar 29, 2024 4:42 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 17 posts ]  Go to page 1, 2  Next
Author Message
PostPosted: Sun Jan 31, 2016 3:30 am 
Offline

Joined: Tue Sep 02, 2014 12:54 am
Posts: 53
Hello everybody! :D

First, i'm happy to see this forum back, hurray !

Here's my problem:

My engine wiring loom melted and i suppose that the +12v was in contact with some sensors wires :shock:
Actually , my P28 ECU give me code 6 and 10.

I have a spare P28 and i switched some parts between the 2 ECU to find wich one is fried... but without success.
Does somebody have any idea of where to look at ?

( part switched: IC5 and IC6 )

Thanks for the help and sorry about my bad English :oops:


Last edited by seven40 on Sun May 07, 2017 1:52 pm, edited 1 time in total.

Top
 Profile  
Reply with quote  
PostPosted: Tue Feb 02, 2016 8:21 am 
Offline

Joined: Tue Sep 02, 2014 12:54 am
Posts: 53
So i decide to test my board by replacing HIC1 converter with one from a spare ECU.
We will see if the solution sits here :D


Top
 Profile  
Reply with quote  
PostPosted: Thu Feb 11, 2016 1:06 pm 
Offline

Joined: Tue Sep 02, 2014 12:54 am
Posts: 53
Not find enough time to do the replacement :oops: , the HIC1 daughter board is very hard to desolder and i'm scared to break something :cry:

I'll try quietly this week-end and i will see if my problem will be solved or not.


Top
 Profile  
Reply with quote  
PostPosted: Sat Feb 13, 2016 5:57 am 
Offline

Joined: Tue Sep 02, 2014 12:54 am
Posts: 53
Ok, HIC1 board is replaced but still the same result code 6 and 10 ...

I also tried to replaced IC17 and it's not better so now i don't know where to look at :oops:

Does somebody has any idea? :D


Top
 Profile  
Reply with quote  
PostPosted: Sun Feb 14, 2016 3:21 am 
Offline

Joined: Tue Sep 02, 2014 12:54 am
Posts: 53
So i find that HIC1 daughter board is used for the distributor sensors, so it is not involved in my problem :oops:

The only things i didn't replace are C33 and C38 tantalum capacitor, is it possible that the solution of my problem sits here?
I think that no but i'm going to try...

For memory: DM2 DM3 and DM8 where replaced with known good components, same thing with IC 5 and IC 6 , the values on RM1 are ok ...


Top
 Profile  
Reply with quote  
PostPosted: Sun Feb 14, 2016 7:30 am 
Offline

Joined: Tue Sep 02, 2014 12:54 am
Posts: 53
So i replaced C33 and C38 , i have to test on my car if this time it is working...


Top
 Profile  
Reply with quote  
PostPosted: Sun Feb 14, 2016 3:06 pm 
Offline

Joined: Tue Sep 02, 2014 12:54 am
Posts: 53
... and still the same result, code 6 and 10 :evil:


Top
 Profile  
Reply with quote  
PostPosted: Mon Feb 15, 2016 10:28 am 
Offline

Joined: Tue Feb 02, 2016 7:34 am
Posts: 32
But you DID change the sensors and the wire harness? Did the other P28 work in your car?


Top
 Profile  
Reply with quote  
PostPosted: Mon Feb 15, 2016 1:07 pm 
Offline

Joined: Tue Sep 02, 2014 12:54 am
Posts: 53
My car run perfectly with my vtec converted P75, i also have a Demon with Neptune on it so i can see that my sensors and my wiring are all good.

The next step is to see if i have some voltage on the pin D15 and D13, to see if the sensors are feeded or not.

Somebody knows how the +5 volt is made by the ECU?

I also replaced all the electrolitic capacitors, the traces on the board are ok, so i don't know now where to look at :oops:


Top
 Profile  
Reply with quote  
PostPosted: Sun Feb 21, 2016 1:55 am 
Offline

Joined: Tue Sep 02, 2014 12:54 am
Posts: 53
Still not find any time to look at this ECU, does somebody has any idea of where to look at?


Top
 Profile  
Reply with quote  
PostPosted: Sun Apr 17, 2016 10:02 am 
Offline

Joined: Tue Sep 02, 2014 12:54 am
Posts: 53
So i start to build my "ghetto style" ecu bench, with a computer power supply.
I'm going to add oem sensors and for the igniter, i'm planning to use a spare igniter with a 12volts motor to make it turn :oops:

I know it seems "freaky" but i hope it will work :lol:

I have tested the power supply system, it works perfectly, just have to had the sensors and it will be ok!
If it works, i will take the time to do something "clean", hope that i will find my problem on my bad ECU with that system :D


Top
 Profile  
Reply with quote  
PostPosted: Sat May 28, 2016 6:25 am 
Offline

Joined: Sun Mar 08, 2009 11:12 pm
Posts: 100
Location: Malaysia
seven40 wrote:
So i start to build my "ghetto style" ecu bench, with a computer power supply.
I'm going to add oem sensors and for the igniter, i'm planning to use a spare igniter with a 12volts motor to make it turn :oops:

I know it seems "freaky" but i hope it will work :lol:

I have tested the power supply system, it works perfectly, just have to had the sensors and it will be ok!
If it works, i will take the time to do something "clean", hope that i will find my problem on my bad ECU with that system :D


Hi friend.
How the status?
appreciated if you can share here how you did the troubleshooting using PS system :)


Top
 Profile  
Reply with quote  
PostPosted: Thu Jun 16, 2016 1:05 pm 
Offline

Joined: Tue Sep 02, 2014 12:54 am
Posts: 53
Actually it is in stand-by, i'm very busy but i'll finish it as soon as possible...


Top
 Profile  
Reply with quote  
PostPosted: Sun Jun 19, 2016 10:22 pm 
Offline

Joined: Sun Mar 08, 2009 11:12 pm
Posts: 100
Location: Malaysia
seven40 wrote:
Actually it is in stand-by, i'm very busy but i'll finish it as soon as possible...

we will waiting for your result..:)


Top
 Profile  
Reply with quote  
PostPosted: Sat Jan 07, 2017 1:31 pm 
Offline

Joined: Tue Sep 02, 2014 12:54 am
Posts: 53
Still not find enough time toworkon my bench but as soon as possible, i'll do it :D


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 17 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Bing [Bot] and 12 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group