pgmfi.org • View topic

View unanswered posts | View active topics

Board index » Assistance - ASK QUESTIONS HERE!!! » General Hardware Assistance

All times are UTC - 5 hours [ DST ]

P06 solid cel

Moderator: Moderat0rz

Page 1 of 1

[ 3 posts ]

Previous topic | Next topic

Author

Message

fugazzyef

Post subject: P06 solid cel

Posted: Sat Jul 06, 2013 12:06 am

Joined: Wed Jul 18, 2012 12:18 pm
Posts: 5

hi dudes,

im having issues with a solid cel even without the jumper, and revs 4000rpm..

would you help me please

thanks

Top

swordofdoom

Post subject: Re: P06 solid cel

Posted: Sun Jul 07, 2013 4:23 am

Joined: Mon Jan 07, 2013 4:47 pm
Posts: 102

well Dude,

your getting a solid light mostly because, you didn't solder properly.
If it worked before and its not working now everything points to a bad solder joint, or loose metal stuck somewhere between the circuits. You could have fried something out while soldering too.
If you did it yourself recheck all the circuits and if someone did it for you slap them a few times and have them re-check it.

Top

nonsoundflux

Post subject: Re: P06 solid cel

Posted: Fri Jul 12, 2013 2:44 am

Joined: Mon Nov 09, 2009 2:41 pm
Posts: 479

there's a myriad of reasons you could have a solid cel, all of which have been documented and resolved. try searching.

Top

Page 1 of 1

[ 3 posts ]

Board index » Assistance - ASK QUESTIONS HERE!!! » General Hardware Assistance

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 18 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: