pgmfi.org

So i'v been looking how to add knock to a p06(chipped to a p28, has vtec and chip socket installed), just a little background i have an h22 in a 93 accord(cb7).
onto it. i got a p72 from a guy, and it has a ton of missing parts on it(the knock board is still good) im wondering how to remove this and put it onto a p06, and make it work correctly.

Also just a side question if someone knows, I am using chrome pro for tuning and the rev limiter isn't working.

P72 knock board will be useless on a H22 (even more useless than it is on a B18c1).

And even though it isn't a question, you probably have something wrong if rev limiter isn't working. Make sure FTS and LC are set the same as your rev limiter to start with to eliminate possible issues.

How would it be useless?and im not sure what FTS means? im guessing high cam? since LC means low cam. and that would make sense because they arent the same i want mine set to 7.2k and the map goes out past 8k

Stock honda knock boards suck on the stock engine they were designed for, and are basically useless on any other engines.

FTS= Full throttle shift

LC= Launch control