Joined: Sat Sep 19, 2009 3:13 pm Posts: 26
|
I have a turbocharged 98 EDM Civic Aerodeck with D16B2 motor. I have gone from the stock OBD2a ECU to a chipped OBD1 P06. The trouble is that my ABS light is on and it doesn't flash any codes with the 2 pin diagnostic plug bridged. I've re-set the ECU and no CEL codes are present but just can't get rid of the ABS light. Will a scan tool work on this as it is. The EDM cars have a 5 pin connector for the diagnostic in the same place as the 2 pin jobbie. Has anyone had problems with ABS codes after an obd swap?
|
|