pgmfi.org

Hacking up Honda's ECU
It is currently Tue Dec 11, 2018 9:24 pm

All times are UTC - 5 hours [ DST ]





Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 16 posts ]  Go to page 1, 2  Next
Author Message
PostPosted: Mon Oct 20, 2003 12:30 am 
what's the multiplier setting for a dohc zc.

Thanks


Top
  
Reply with quote  
PostPosted: Mon Oct 20, 2003 3:56 pm 
PM7? 00 01 01 02 02 02 03 03 03 03 03 04 04 04 04
They are at memory address 0x3FF1.

[%sig%]


Top
  
Reply with quote  
PostPosted: Wed Oct 22, 2003 12:55 am 
All I want to do is make the base turbo tune for PM6 and make it work for a ZC motor. Do I need to change to those fuel multipliers?


Top
  
Reply with quote  
PostPosted: Wed Oct 22, 2003 12:46 pm 
No, you need the values from the fuel and ignition tables as well as the multipliers for the ZC..

Sorry to say, but it would be easier to use (EDIT)"another editor"(/EDIT). Export the maps from a PM7 (the ZC ECU) then open the PM6 ROM, and import those maps in. It will automatically import fuel multipliers with the maps. :-/

[%sig%]

Post Edited (10-23-03 17:35)


Top
  
Reply with quote  
PostPosted: Wed Oct 22, 2003 8:27 pm 
Ouch...


Top
  
Reply with quote  
PostPosted: Thu Oct 23, 2003 12:05 pm 
..it's just a lot of people don't know how to use a hex editor to change data int he ROM. After the maps are imported and saved it can then be edited again in GhD... :(

[%sig%]

Post Edited (10-23-03 12:10)


Top
  
Reply with quote  
PostPosted: Thu Oct 23, 2003 2:36 pm 
So basically I just need to open the PGMFI_ROM-Boost.bin, then IMPORT the PM7 tune and that's it right?


Top
  
Reply with quote  
PostPosted: Thu Oct 23, 2003 5:03 pm 
The last version of GhD actually supports multipliers. Nice plug tho


Top
  
Reply with quote  
PostPosted: Thu Oct 23, 2003 5:36 pm 
..but, correct me if I'm wrong, you have to import the maps through a (EDIT)"another editor"(/EDIT), like I had stated?

Multipliers alone will not allow the maps to run a DOHC engine. The values themselves would need to be there, yes? ..and hand typing them takes so long. So I offered another solution.
.

[%sig%]

Post Edited (10-24-03 22:46)


Top
  
Reply with quote  
PostPosted: Thu Oct 23, 2003 5:45 pm 
I would like to comment to the both of you that I use both of your editors and they both will always be on my hardrive. Because I would use something over the other one doesn't mean that I have favorites over them. I wouldn't let it bother either of you. I remember when a few people over a year or two ago would agree that hacking into the ECU would be almost impossible and this was about the time I wanted to "DO" something about it. I was about to buy a Gold ZDYNE, but now I don't have to. The ground that's been covered between that time is absolutly amazing to me...

.. but anyway. To answer my question. Is that all I have to do? I noticed that all the values changed when I imported the PM7 tune over the boost bin.

Thanks

Graham


Top
  
Reply with quote  
PostPosted: Thu Oct 23, 2003 5:56 pm 
..that's because the pulse durations are different, but yes, that is all you have to do.

[%sig%]

Post Edited (10-24-03 22:44)


Top
  
Reply with quote  
PostPosted: Thu Oct 23, 2003 6:31 pm 
Jason, if it makes you feel better, your editor, *TURBOEDIT*, is awesome.

Keeping your cool is more important than fighting over absolutly nothing.


Top
  
Reply with quote  
PostPosted: Thu Oct 23, 2003 7:16 pm 
<edit> This doesn't belong in public, sorry </edit>

Mike


Top
  
Reply with quote  
PostPosted: Fri Oct 24, 2003 3:33 am 
(EDIT)..agreed..(/EDIT)

[%sig%]

Post Edited (10-24-03 22:48)


Top
  
Reply with quote  
PostPosted: Thu Oct 30, 2003 12:41 pm 
Offline

Joined: Tue Jul 27, 2004 2:32 am
Posts: 52
Turbo_EF9 wrote:

> No, you need the values from the fuel and ignition tables as
> well as the multipliers for the ZC..
>
> Sorry to say, but it would be easier to use (EDIT)"another
> editor"(/EDIT). Export the maps from a PM7 (the ZC ECU) then
> open the PM6 ROM, and import those maps in. It will
> automatically import fuel multipliers with the maps. :-/
>

>
> Post Edited (10-23-03 17:35)

so this will work on my tubo'd dohc ZC???

[%sig%]


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 16 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron


Powered by phpBB® Forum Software © phpBB Group