All, forgive me if this is stupid question, but on many of the PM6 and PM7 ROM's the ignition maps (as viewed from Ghettodyne 1.3) have entries indicating more than 40 degrees of timing retard. I have been personally running one of these BIN's for more than a month with no problems or codes...in Ghettodyne 1.4 if you try to change any of the entries to values greater than 40 it pops up an error message stating "You cannot retard your timing more than 40 degrees...I'll assume that was a typo.". If this is the case, then why is my ZC running better than it ever did with a PG7 ECU? Does the ECU ignore anything more than 40 degrees of retard? Thanks, -Z
|