pgmfi.org

Hacking up Honda's ECU
It is currently Thu Dec 14, 2017 4:42 pm

All times are UTC - 5 hours [ DST ]





Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 3 posts ] 
Author Message
PostPosted: Thu Mar 23, 2006 10:46 am 
Offline

Joined: Wed Oct 12, 2005 7:21 am
Posts: 33
Hello.

I've bought two kinds of Nokia cable ,first is cable based on chip:
1.
oti 6858
They've sad me that this is to 3200 and 5100 not for 6100 series.
Datasheet:

http://www.oti.com.tw/eng/supports/down ... _verR2.pdf
pictures:

http://156.17.231.249/pgmfi/HPIM1710.JPG
http://156.17.231.249/pgmfi/HPIM1708.JPG

I use pin configurations (TX RX),like there is on datasheet ,but something is wrong.And i realy don't know what.
I think that i used any kind of conections, so maybe I can't use this cable to datalogin.

2.
second cable I've bought was ,cable based on

Ark Micro chip 3116S ,but I can't find any datasheet in english

pictures:
http://156.17.231.249/pgmfi/HPIM1706.JPG
http://156.17.231.249/pgmfi/HPIM1707.JPG

This is for sure DKU-5 cable
I tried to use couple configurations but without any knowledge about this Ark and cable colours configuration
I tried use black as GND,second time white ,but without any results.
And there is no "wrap GND" round the all cables.

I've found drivers for each chips ,but still I have no response from Ecu Control, in some configurations it seems
that I'm conected but I have no data on ecu gauges, I use bin with datalogin.

If someone could give some advice I would be glad.
Is there any hope to run this stuff?


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Sun Apr 02, 2006 11:36 pm 
Offline

Joined: Thu Apr 28, 2005 4:52 pm
Posts: 45
Location: NC
First OTI 6858 is a USB->RS232 Converter not a TTL->USB or TTL->RS-232 like what you need to use. In order to use the OTI 6858 you must use it in series with a TTL->RS232 cable.

ie. 1.ECU (TTL) --- 2.TTL->RS232 --- 3.RS232->USB


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Wed Apr 19, 2006 3:01 pm 
Quote:
ie. 1.ECU (TTL) --- 2.TTL->RS232 --- 3.RS232->USB


so am I right if I make a simple max232 on chip conwerter, it should be running?

thanks I'll try this oportunity at this weekend.


Top
  
Reply with quote  
Display posts from previous:  Sort by  
Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 3 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


Powered by phpBB® Forum Software © phpBB Group