Hi everyone... i got a few questions and will like to see if i can get any help from any of you guys to crack this one.
Heres the components i will be talking about.
90 PM6 ECU chipped with Turbo Edit stockPR4 bin on it
Ebay USB data cable
Compaq laptop
ECU control 4.0
pics of the stuff and the wires
OK after reading a lot here and on the ecu control website i have tried to make the datalog work, but no dice.
I have purchased this cable off ebay after my buddy got the same cable and got his P28 dataloggin on uberdata.
i got my PM6, took the rom out, and replaced it with a new chip with the stock PR4 bin in it from turboedit.
i went ahead and soldered the CN3 into cables and into a serial conector out of the case of the ecu as u guys can see.
as stated on this previous topic on how to use this cables...
http://www.pgmfi.org/phorum/read.php?f=16&i=521&t=521
i went ahead and soldered all my pertinent conections
i went ahead and loaded the driver to my pc (since the driver is big and icant attach it, i can have anyone look at it for me and i can send it to ya). loaded the driver and everything is fine...
since my laptop has no batt, we went ahead and used my buddy's and when we went to the car and tried to datalog, we got no readings... all we got was like a 1/2 second info just a flash or crazy info, and no more and only happened when we pressed start or stop dataloggin. we got no readings at all on my laptop.
we read on the ecu control webpage a note from few months ago that states that ecu contorl 4 doesnt support PM6 ecus yet.... well the weird part is that while i am reading stuff here i see many successfull people saying that they have already starting dataloggin info on their 90-91 PM6 with ecu control.... AM I READING RIGHT?? OR NOT?? DOES ECU control support PM6 YES or NO???
anyways....while reading on the previous post, i tought i might have mixed the RX and TX since the colors sometimes dont match
well it didnt make any difference.. i still get no readings..
my settings on ECU control are right... i have the right COM5 on laptop
, i have the same driver my buddy has used on the same cable he has, the ecu control says conected but no info is received
on this cable there is a yellow, white, green, blue wire from the USB side, and to the other side theres a green, blue, white wires,,...
i have the Green to CN3 #1, i got the blue to CN3 #2, and i got the white one to CN3 #4
any help is appreciated it
[%sig%]
Post Edited (07-17-04 13:48)