pgmfi.org

Hello,

After doing some research i've yet to come across any information on how to datalog wideband input with Ecucontrol.

I see the gauge in ecucontol for wideband logging, but how does ecucontol know where to get the wideband input. I was planning to go with the AEM UEGO gauge type Wideband, which will allow for a rs-232 connection for wideband logging, but I can't find anything in ecucontol to point it to a serial port to log this info. Can I use this guage or do I need to use a wideband which has it's own datalogging?

At first I thought ecucontol could pick up this data from the ecu, but from what i've been reading the Ecu cannont understand the wideband input. Please any direction would be appreciated.

Thank
Ed

For this I will need to add another com port as input to ecucontrol to have wb dataloging.

I would need to know the protocol of the AEM thing, and you would need 2 port on the laptop, 2 serial or 1 usb and 1 serial.