I'v made datalogging interface on my P30JDM (smal case), but it not work... when I testing communicatnion on hyperterminal with shorted J4 (J12 on USDM ECU's) echo works fine, so interface is ok; but when trying starts datalogging on ecucontrol, have no readings; same on uberdata; On Crome - RTP comminication test fail; My setup:
- Interface (DKU-5 cable) - Oti006858 with oryginal drivers (not compatible with 2303)
- Open J4 jumper
- Eprom with Crome 1.2 Quick Datalogger+RTP
Any ideas to solve problem?
THX
Artur
|